Vernon Forklift Training Programs

Vernon Forklift Training Programs - Are you looking for a job as a forklift driver? Our regulatory-compliant mobile equipment operator training provides instruction in kinds of forklifts, pre-shift check, fuel types and dealing with fuels, and safe use of a forklift. Practical, hands-on training assists those participating in acquiring fundamental operational skills. Course content covers existing rules governing the utilization of forklifts. Our proven forklift programs are meant to provide training on these kinds of trucks: powered pallet truck, narrow isle forklift and counterbalanced forklift.

How to Safely Handle Loads

When the lift truck is in use, do not raise or lower the forks. Loads must not extend above the backrest. This is because of the danger of the load sliding back in the direction of the operator. Inspect for overhead obstacles and ensure there is enough clearance prior to lifting a load. Stay away from overhead power lines. When the load is lifted straight up, tilt it back slightly.

When the load is lifted the forklift will be less steady. Make certain that no pedestrians cross beneath the elevated fork. The operator must not leave the forklift while the load is raised.

While handling pallets, forks must be level and high enough to go into the pallet and extend all the way below the load. The fork's width should provide equal distribution of weight.

Before loading or unloading the truck, chock the wheels and set the brakes. Floors need to be strong enough to support the weight of the load and the forklift combined. Fixed jacks can be installed to be able to support a semi-trailer that is not attached to a tractor. The entrance door height must clear the height of the forklift by at least 5 cm. Edges of ramps, docks and rail cars should be marked and avoid them.

If there is not proper ventilation into the forklift, do not stay in there for long periods. The interior of the truck must have enough lighting and be obstruction free. Check the forklift cab's flooring for holes. The installation of material that are non-slip on the floor would help avoid slipping. Clear whichever obstacles from docks and dockplates and ensure surfaces are not oily or wet.

Lift trucks must not be used to push or tow other forklifts.

Click to Download the pdf