Vernon Forklift Training School

Vernon Forklift Training School - The Significance Of A Forklift Training School When Using The Equipment - Federal and industry regulators have established the criteria for forklift safety training according to their existing regulations and standards. People wanting to operate a forklift should complete a forklift training School prior to utilizing one of these equipment. The accredited Forklift Operator Training Program is designed to provide trainees with the practical skills and information to become an operator of a forklift.

There are forklift operation safety regulations which must be followed pertaining to pre-shift inspections, and rules for lifting and loading.

Prior to a shift beginning, an inspection checklist should be completed and given to the Supervisor or Instructor. If whatever maintenance issue is discovered, the machinery must not be used until the problem is addressed. To be able to indicate the machinery is out of order, the keys need to be removed from the ignition and a warning tag placed in a visible spot.

Safety rules for loading will consist of checking the forklift's load rating capacity to know how much the machinery can handle. When starting the machinery, the forks should be in the downward position. Remember that there is a loss of about one hundred pounds carrying capacity for every one inch further away from the carriage which the load is carried.

To safely lift a palletized load, drive the forklift toward the pallet and stop with the fork three inches from the load. Level the mast until it is at right angles to the load. Raise the forks to an inch below the slot on the pallet and drive forward. Next lift forks four inches. Tilt back the load to be able to secure it for moving. Drive the lift backwards if the load obscures frontal vision. Check behind and honk to warn other workers. Never allow forks to drag on the ground.

Click to Download the pdf