Vernon Boom Lift License - Only completely licensed persons should operate an aerial boom lift. Qualification could be obtained through a combination of classroom sessions and practical training with the specific type of aerial lift which will be utilized on the job. A License is needed for any individual who operates or works on an aerial boom lift.
Vehicle-mounted aerial devices comprise the following work vehicles: extensible boom platforms, aerial ladders, vertical towers, articulating boom platforms, and whichever combination of these kinds.
When utilizing a boom lift, there are a few basic safety rules that apply to all boom lifts. Safety of the worker is a top priority while they are working within the basket. The worker should always have on a body harness and lanyard, connecting it to the boom or basket. Never tie off to an equipment, an adjacent pole or a structure. Personnel should stand on the basket floor, and never climb or sit on the basket edge. The manufacturer's load limits should be adhered to.
Aerial lift operators must be authorized to make use of the equipment. The operator must be familiar with all the aspects of the device and must have access to the manufacturers manual which should be kept within the lift. Operators are responsible for ensuring that safety measures are followed in the operation of the lift. Testing lift controls on a daily basis must be carried out. Position outriggers and set brakes (if they are utilized) on pads or a stable surface. When working on a slope, use wheel chocks.
The aerial lift vehicle should never be moved whilst a worker is within the basket of an elevated boom, unless they are using machines that are specifically designed for this. Articulating boom and extensible boom platforms made use of as personnel carriers must have accessible, plainly marked, upper controls. Except for in emergency situations, lower controls should not be used to override upper controls unless the individual inside the lift gives consent.
Do not wear tree or pole climbers shall while working from an aerial lift.
Do not alter the insulated portion of the aerial lift.
Do check the booms to make sure that it is properly cradled and the outriggers are in the stowed position prior to moving.
When operating a boom lift next to power lines, ensure the lines are di-electrically tested according to local rules.